The CAT3637 is optimised for applications with one bank of five or six identical LED channels, a typical configuration for larger LED screen portable products
Catalyst Semiconductor has expanded its line of patented Quad-Mode fractional charge pump LED drivers with a new device optimised for portable products. The new CAT3637 addresses the requirements for high-efficiency and easy LED programming in these products, with 10% higher efficiency (compared with three-mode charge pumps) and a simple, 1-wire EZDim interface control.
The CAT3637 is optimised for applications with one bank of five or six identical LED channels, a typical configuration for larger LED screen portable products.
The device incorporates a simplified version of Catalyst's already easy-to-use, 1-wire EZDim interface, which supports 16 output power levels, from zero to 30mA full brightness 2mA resolution steps.
With efficiency levels as high as 92%, no added capacitors required, and a tiny 3 x 3mm, low-profile TQFN package, the Quad-Mode CAT3637 saves significant board space and costs in next-generation portable products.
According to Scott Brown, Vice President of Marketing for Catalyst Semiconductor: 'When it comes to LED-based products, we are seeing a wide variety of design approaches throughout the market, depending on the customer and application'.
'The CAT3637 is the fifth device in Catalyst's Quad-Mode product line and exemplifies our strategy to be a 'one-stop' vendor for a broad range of LED drivers which address this diversity of customer requirements'.
The CAT3637 joins the following devices in Catalyst's Quad-Mode family of LED drivers: the CAT3604V four-channel LED driver with PWM dimming interface; and the CAT3636 six-channel, CAT3644 four-channel and CAT3643 three-channel devices with 1-wire EZDim interface.
The CAT3637 LED driver is priced at US $0.82 each in 10,000 piece quantities.
